Wiring gauges through dash

[s4mmi]

Did anyone wire their gauges through the small panel in the center of the dash? Mine are in the a pillar atm but planning on replacing them on the dashboard. I unclipped the small panel but it seems their is no access to the underside of the dash. Anyone managed to do this?

Verstuurd vanaf mijn SM-G388F met Tapatalk

 

[hondamad2204]

That small panel should have a sensor on it for the auto ac??? Unsure why yours is disconnected. Sorry I cannot help with your original question btw.

 

[s4mmi]

Mine doesn't have AC so the panel is blank.

Verstuurd vanaf mijn SM-G388F met Tapatalk

 

[linh-ej9]

Mine was ran through there before but i got a mugen gauge hood now so i drilled a hole on the dash.

 

[linh-ej9]

Try using some metal wire and put it through.

 

[s4mmi]

Mine was ran through there before but i got a mugen gauge hood now so i drilled a hole on the dash.

I don't want to drill a hole in the dash so I prefer running them through there.

Verstuurd vanaf mijn SM-G388F met Tapatalk

 

[s4mmi]

All done! Turned out to be pretty easy to guide the wires through.

Verstuurd vanaf mijn SM-G388F met Tapatalk