Search results

Hi all, Hope everyone is good. I am in the need of replacing the front disks and pads on my DC5. I bought the car back in 2012 and have never needed to replace them untill now... I am led to believe that the car has BIOT 2 piece disks and ferodo ds2500 pads used with the standard brembo...

Hi Carl, Thanks for that! I have spoken to the garage who have also been in contact with SPD who has also forwarded them pictures; we have a bush set on order for the front struts and the OEM mounts are being returned. Hopefully these bushes sort the issue and apparently it will. If the...

Hi mate, Thanks for your input. Unfortunately the car is at the garage so can't get some pictures of them. I'll ring the garage and see if they can get a picture sorted for me. In the meantime i'll also try TGM again as I believe they may have originally installed these and completed the FRSU...

This is amazing, glad the forum has been saved! The new layout looks nice and clean too. Just out of interest; what are the typical annual running costs for a forum such as this?

Hi all, I've just had the car in the garage for an MOT and the top mounts and bearings have come back as an advisory. I've asked the garage to fix the issue so they ordered the OEM top mounts - which took nearly 3 weeks due to the recent cyber attack on Honda! Problem is, no that the parts...

Thanks for the info Carl. I'll have a look later and see what spec they are - is there anywhere I should look on the coil-over to see the exact spec? Cheers, Carl.

Hi Jordan and thanks for the input. I never really thought about getting engine oil from Honda as generally I usually go with branded Shell / Mobil etc stuff. However, the other stuff i'll get from honda so thanks for that. ------------------------------ With regards to the top mounts, as I...

Hi All, Hope everyone had a good Christmas and New Years. I am about to start getting everything sorted for a full fluid service and actually spend some time driving the car this year as it has mainly been sat about for the last few months due to having another daily.... What are people's...

If he isn‘t able to I‘m sure I could muster some up as I have vinyl cutters etc [emoji106] Cheers, Carl. Sent from my iPhone using Tapatalk

Hi mate, It would be best to go through the website as it helps keep all the orders together otherwise I may miss a few. Https://www.jdmplates.co.uk Cheers, Carl. Sent from my iPhone using Tapatalk

Thanks mate I appreciate the vouch! The number plate area is a pretty grey area but with BSAU 145e coming out in the next year or so (after this brexit malarkey) I believe they will be more clear. However, every plate must have the bs number and company information printed on the plate; if not...

Awesome mate nice one [emoji4]. Here‘s a quick pic; I need to get some better quality ones showing the Krystal a bit better! https://www.instagram.com/p/BxkkrjzlQxE/?igshid=k5mb4yh3b8me Also with regards to the docs, if you havnt managed to upload them please send them to...

I own a company called JDM Plates. We have stock of 13x6.5 but no resin letters; I can get you some in if needed? I can however supply 4d, Krystal, and the smallest legal sizes in the country for imports [emoji6]. Https://www.jdmplates.co.uk Sent from my iPhone using Tapatalk

Hi All, I just had my MOT on Saturday and it passed fine with a couple of advisories; couple of rear tyres need to be changes (getting all 4 done this week anyways) and top mounts? Monitor and repair if necessary (advisories): Nearside Front Upper Macpherson strut pin or bush worn but not...

Renewal time... again... Was offered £399 for the honda (same as last year) Was offered £387 for the fiesta (up £50 from last year) Both the above from green light. Went to go compare and straight away the fiesta is £207 and the honda is £297 with eSure and LV respectively. However a...

Just a thought but could it be interference coming through the speakers with the signal and power cables from your head unit being too close together? Sent from my iPhone using Tapatalk

I used to have d1 spec lightweight and the garage used an air gun to remove the wheel and cracked half of them... I then went to standard for a while... However, I have since bought some muteki extended lug nuts and i'll just make sure I put standard ones on for when I go to garages etc.

I can understand this to a certain extent but for private plates I think a rectangle plate looks best and these only look good on the sides of the bumper. That‘s my own opinion though! With regards to number plate dilemmas, see the group buy or website link in my signature! PM if if you have...

Hi Giblets, cheers for the comment and recommendation. For piece of mind and for continuity I decided to purchase a replacement filter and tubing as they're already bonded together. However, ITG don't supply the aluminium tubing anymore - its now black plastic. I've changed the filter over now...

Hi Chewy, I spoke to ITG directly and they said the same although they did quote me £112 delivered for a replacement filter with aluminium tubing for a direct replacement. Not sure if that is expensive for a replacement aftermarket filter but I guess its the only option I have! Cheers, Carl.