I was just about to say start the furthest way but you beat me to it!mike.williams said:furthest point first
Well that makes this how to wrong then CLICKYjambo said:When bleeding a car with abs you should always do closest to the abs module first. Old cars with out should be furthest away. Done a lot of training on it down at volvo and it's one of the worst habits old technicians do.
I've seen people do this with a turkey baster before!Rom said:I also bleed furthest first, regardless of car. I actually empty reservoir (not enough to allow air into pipes) first, then fill with new fluid so your spending less time sucking the old fluid through.
But we have a pressure bleeder at work too!
If your only doing a fluid change, there should never be any air getting in. That comes from changing components that are dry.
What, empty the reservoir !? Legend haha.bennn said:I've seen people do this with a turkey baster before!
bennn said:I've seen people do this with a turkey baster before!
Yup, i used one when i changed the steering oil, will use it again when i do the brake fluid.......Dont tell the missus LOLRom said:What, empty the reservoir !? Legend haha.