most powerfull na car on here ??

Guest
:xlol:
Not up to now Jonny, Are you offering your Guinea pig services??

we would be only too happy to oblige. :xyes:

Paul,
 

weggy

Advanced Member
Messages
150
Paul could I ask a question what compression do you run on the 2009 engine?

anyone also is there a difference between the uk spec k20 from an ep3 type R and the jdm dc5 k20 in respect to heads etc.. I will be throwing away the internals.

I am looking to build a track engine and am just trying to get some info to build right, build once type of thing.

my spec at the moment is
Power: 256.8 Bhp @ 9017 rpm
Torque: 156 lbft @ 8220 rpm
Engine:
Autronics SM4 ECU
Mugen airbox
Mugen twin loop cat back exhaust system
Mugen aluminium radiator
Mugen radiator cap
Mugen oil cap
Mugen carbon plug cover
Mugen resevoir socks
Spoon 70mm throttle body
Spoon 4-2 and 2-1 with de cat exhaust manifold
Hard pipe from air box to throttle body
FD2 intake manifold

cheers
 

garytc78

Advanced Member
Messages
290
I'm really good mates with weggy aka mark and i think and i'm sure he will correct me if i'm wrong but i'm sure all he had to was move the bonnet stay and modify his mugen bonnet a bit but it did look really tight under there.
 

Guest
Hi Weggy,
The compression ratio is only a ratio and not a pressure, so it all depends on what cam overlap you use, on a road engine without cams anything over 10.5:1 is ok,with cams it varies right up to 14:1.

We use it as a guide to calculate the physical combustion pressure, But dont worry we can sort all that technical stuff out, give me a call and we can discuss your requirements. 01772 299820.
regards,
Paul,
 

Zen1

Advanced Member
Messages
174
BC Engine Builds:

BUDDYCLUB TA2009-305bhp 212.6ft/lb after a bit of tweeking. still more to come in the midrange.(still on a single plenum). New 2009 engine,BC-ST2 cams with altered timing,BC Vernier pullies, BC Titanium caps,BC valve springs,BC Modified head,BC header,spec3 pro system,RBC,BC70mm Billet TB,Hondata,BC LONG RAM Alloy Induction kit.

JT3173 - 275.3 bhp 189 lb/ft tourque at TDi North, KPRO, BC Spec 3 cams, modded RBC, 70mm throttle body, BC prototype CAI, 550 RC injectors, 87.5mm pistons, BC Pro Spec exhaust, Toda Racing manifold.(engine by Buddyclub of course...

That VTEC Grin - 275.0bhp 187 lb/ft torque, KPRO, BC N+ Cams, Gruppe-M, BC 70mm Throttle Body, BC modified RBC manifold, Omega Forged Pistons 12.5.1, Toda Racing Manifold, Toda Racing Exhaust, (engine by Buddyclub)

BUDDYCLUB TA2008 275.2 bhp 218 ft/lb at TDi, k-pro,BC sp3 cams,RBC,BC Induction ram,BC springs,BC tit caps,BC pulleys,BC header,BC Pro Spec system,BC 70mm TB,

________________________________________________________________________

K20A N/A Combinations with CAMS:

black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop
D@nCeR - 272.3 (186.4 lb/ft torque) GruppeM, Kpro, RBC intake+hondata gasket, Toda A3 Cams, J's Racing T/B, Toda Mani, Spoon B-Pipe,
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
BUDDYCLUB- 270bhp 208 ft/lb torque, Try Before You Buy road demo ,SP3 cams,header,sp4 system,BC filter,K-pro,
________________________________________________________________________

K20A - N/A Combinations without Cams:

Mikegsi - 262.2bhp, 181ft/lb torque. Toda mani, gruppem, rbc, spoon tb, kakimoto regu 06&r, hondata heatshield, earthing kit, grounding position moved, shiny bits
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
DC5Dub07 - 255.3BHP 169.9 lb/ft torque Ai Autosports NI - Kpro, Gruppe M, RBC, DC sports header, 5ziegen catback.
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
Lockwood77 - 252.9bhp (174.6 lb/ft), TDi North, 6/4/09 - GruppeM, J's TB, RBC, Hondata heatshield gasket, Toda exhaust manifold and cat-back
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
Jayk "DC5 3 - 250hp (177 lb/ft torque) - Fujita F5, Toda Mani, Supersprint B-pipe, OEM Back Box, KPRO
Zen1 - 250bhp (171.2 lb/ft torque) Kpro, GruppeM, Piper 4-2-1 Mani +sports cat J's 60RS Catback, RBC, Hondata Gasket, TDI North 14/12/09
BENNY 249.2 BHP (178 LB TORQUE) KPRO, RBC, DC SPORTS MANI, HKS SILENT CATBACK, AEM V2 AND THATS IT! NO MORE!
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
Integradan - 245.1bhp (165.8 lbft) Kpro, J's Racing CAI, DC Sports Mani, Unknown JDM Exhaust - TDi North (12.06.09)
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back -
sydney- 242.7hp 223 whp (166lb/ft) proven. mugen n1 ecu, gruppe m, rbc with hondata heatshield, hks sparks, dc sports mani, j's racing exhaust (one that looks like toda)
TDI North 25/02/08
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
Mark_teg - 233.0bhp (166 lb/ft) DC Mani, GruppeM, Spoon B-pipe, OEM Backbox
Gaz DC5 - 231.3 (168.3lbft Torque) TDI 11/9/09. Mugen N1 ECU, RBC inlet with Hondata Gasket, Spoon 4-2 & 2-1, ITG drop in filter
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Garytc78 - 224 (152 lb/ft ) - AEM V2 mugen twin loop awesome gti 27th Sep 2008
Gaz1- 222.8 (148.7 lb/ft torque)
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215
 

TypeRKid

Advanced Member
Messages
548
BC Engine Builds:

BUDDYCLUB TA2009-305bhp 212.6ft/lb after a bit of tweeking. still more to come in the midrange.(still on a single plenum). New 2009 engine,BC-ST2 cams with altered timing,BC Vernier pullies, BC Titanium caps,BC valve springs,BC Modified head,BC header,spec3 pro system,RBC,BC70mm Billet TB,Hondata,BC LONG RAM Alloy Induction kit.

JT3173 - 275.3 bhp 189 lb/ft tourque at TDi North, KPRO, BC Spec 3 cams, modded RBC, 70mm throttle body, BC prototype CAI, 550 RC injectors, 87.5mm pistons, BC Pro Spec exhaust, Toda Racing manifold.(engine by Buddyclub of course...

That VTEC Grin - 275.0bhp 187 lb/ft torque, KPRO, BC N+ Cams, Gruppe-M, BC 70mm Throttle Body, BC modified RBC manifold, Omega Forged Pistons 12.5.1, Toda Racing Manifold, Toda Racing Exhaust, (engine by Buddyclub)

BUDDYCLUB TA2008 275.2 bhp 218 ft/lb at TDi, k-pro,BC sp3 cams,RBC,BC Induction ram,BC springs,BC tit caps,BC pulleys,BC header,BC Pro Spec system,BC 70mm TB,

________________________________________________________________________

K20A N/A Combinations with CAMS:

black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop

Type R Kid - 272.4bhp 174lb/ft torque,Kpro,Buddyclub N+ Camshafts and P1 Racing Titanium valve and valve springs,RBC Intake Manifold and Hondata Gasket,Buddyclub throttle body,Group M Intake,AEM TRU Power Pulley,Buddyclub Manifold,Spoon B Pipe,Spoon N1 backbox All work done by UNIT 8 :D

D@nCeR - 272.3 (186.4 lb/ft torque) GruppeM, Kpro, RBC intake+hondata gasket, Toda A3 Cams, J's Racing T/B, Toda Mani, Spoon B-Pipe,
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
BUDDYCLUB- 270bhp 208 ft/lb torque, Try Before You Buy road demo ,SP3 cams,header,sp4 system,BC filter,K-pro,
________________________________________________________________________

K20A - N/A Combinations without Cams:

Mikegsi - 262.2bhp, 181ft/lb torque. Toda mani, gruppem, rbc, spoon tb, kakimoto regu 06&r, hondata heatshield, earthing kit, grounding position moved, shiny bits
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
DC5Dub07 - 255.3BHP 169.9 lb/ft torque Ai Autosports NI - Kpro, Gruppe M, RBC, DC sports header, 5ziegen catback.
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
Lockwood77 - 252.9bhp (174.6 lb/ft), TDi North, 6/4/09 - GruppeM, J's TB, RBC, Hondata heatshield gasket, Toda exhaust manifold and cat-back
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
Jayk "DC5 3 - 250hp (177 lb/ft torque) - Fujita F5, Toda Mani, Supersprint B-pipe, OEM Back Box, KPRO
Zen1 - 250bhp (171.2 lb/ft torque) Kpro, GruppeM, Piper 4-2-1 Mani +sports cat J's 60RS Catback, RBC, Hondata Gasket, TDI North 14/12/09
BENNY 249.2 BHP (178 LB TORQUE) KPRO, RBC, DC SPORTS MANI, HKS SILENT CATBACK, AEM V2 AND THATS IT! NO MORE!
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
Integradan - 245.1bhp (165.8 lbft) Kpro, J's Racing CAI, DC Sports Mani, Unknown JDM Exhaust - TDi North (12.06.09)
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back -
sydney- 242.7hp 223 whp (166lb/ft) proven. mugen n1 ecu, gruppe m, rbc with hondata heatshield, hks sparks, dc sports mani, j's racing exhaust (one that looks like toda)
TDI North 25/02/08
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
Mark_teg - 233.0bhp (166 lb/ft) DC Mani, GruppeM, Spoon B-pipe, OEM Backbox
Gaz DC5 - 231.3 (168.3lbft Torque) TDI 11/9/09. Mugen N1 ECU, RBC inlet with Hondata Gasket, Spoon 4-2 & 2-1, ITG drop in filter
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Garytc78 - 224 (152 lb/ft ) - AEM V2 mugen twin loop awesome gti 27th Sep 2008
Gaz1- 222.8 (148.7 lb/ft torque)
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215




Just updated with my figures :)
 

Guest
Well done Type R Kid. =D>

Your Well up there with the best of the std bottom end cars. 8)

Your Torque WILL improve all the way up the graph by using our P1-Racing long ram induction system, we tested it last month back to back (within 3 minutes) against a Groupe M on the same Dyno/same car and it gave an average 3-5ft/lb better torque and an average 3-5 bhp all the way up the graph. (mark will clarify this ^^).
\:D/

p.s.Would you mind giving everyone your unbiased opinion (as i dont know you personally) ,,"how do the N+ cams drive below the panic button"?? I have heard other makes are a bit plucky..
 

TypeRKid

Advanced Member
Messages
548
Hi Paul,

These Buddyclub N+ Cams are excellent in my opinion! They are very smooth like normal cams except they are more aggressive when in vtec mode. With all the mods now and with these cams the car is sooooo responsive i dont even have to drop down a gear anymore to have instant power as its already there. These cams suit me very well as i use my car daily but also another factor to take into account is the fitting of these and wearing in of these too. I know Mark (from UNIT 8) spent ALOT of time and effort into fitting these and the precise accuracy needed in fitting these. So ive got to give him credit for fitting and most importantly mapping. =D>

Really happy with the results too as my car produced very good "accurate figures" with no bottom end work done on the engine :)

Will post up the dyno sheet when i have time.
 

Guest
:lol: :lol:

You heard it right here folks, =D>

glad your happy with our maticulously developed products mate.
At Buddyclub (All around the world) We Live,Eat and Breath HONDA. We will continue our UK race development program in 2010 to bring everyone Buddyclub or P1-Racing development products that work the best, tried and tested !,lots of trophies and hard earned championship wins worldwide to enforce our success and commitment to you!. the Honda owners.

There is also a distinct possibility that Buddyclub UK will be running two cars next year, car 2 will be offered for hire (in TA and Nippon) with full Pit team and parts support.(wow a chance to WIN without the trial and error,or building an expensive car) ??? anyone interested should email info@buddyclubuk.com
No National race experience is required ,but if not then test days (basic training) are compulsary.

I just read today that James Thompson just won the (ETCC)European Touring Car Championship in a Honda Accord Euro-R. With a JAS engine producing over 10 bhp less than our 2009 Time Attack engine.
:-" :-$
 

MJ Type-R

Advanced member
Messages
1,578
paul hughes said:
I just read today that James Thompson just won the (ETCC)European Touring Car Championship in a Honda Accord Euro-R. With a JAS engine producing over 10 bhp less than our 2009 Time Attack engine.
:-" :-$
Paul....

This is a little miss leading :!:

I think the ETCC cars have a max CC of 2.0L.... I understand your time attack car... is over this :?

Therefore, the JAS cars are making 300hp from 2.0L format 8) .... slightly more than your 2.0L builds I think... or is this now wrong :?:

Mike
 

Guest
MJ Type-R said:
paul hughes said:
I just read today that James Thompson just won the (ETCC)European Touring Car Championship in a Honda Accord Euro-R. With a JAS engine producing over 10 bhp less than our 2009 Time Attack engine.
:-" :-$
Paul....

This is a little miss leading :!:

I think the ETCC cars have a max CC of 2.0L.... I understand your time attack car... is over this :?

Therefore, the JAS cars are making 300hp from 2.0L format 8) .... slightly more than your 2.0L builds I think... or is this now wrong :?:

Mike
:-k
Sorry mike, the point isnt to be misleading, or to offer people £40k ETCC 2.0 engines(290bhp).??
It is to make a comparison of what members CAN actually have for £3 to £6k in their own mere mortals cars when there are no restrictions. The easiest comparisons to understand are those that people see on TV. Thats all basically. :)
 

MJ Type-R

Advanced member
Messages
1,578
" I have moved some posts about... so that this remains on Topic "

Paul - No more adverts in this post please.

Mike
 

Paul G

Members
Messages
713
weggy said:
Paul could I ask a question what compression do you run on the 2009 engine?

anyone also is there a difference between the uk spec k20 from an ep3 type R and the jdm dc5 k20 in respect to heads etc.. I will be throwing away the internals.

I am looking to build a track engine and am just trying to get some info to build right, build once type of thing.

my spec at the moment is
Power: 256.8 Bhp @ 9017 rpm
Torque: 156 lbft @ 8220 rpm
Engine:
Autronics SM4 ECU
Mugen airbox
Mugen twin loop cat back exhaust system
Mugen aluminium radiator
Mugen radiator cap
Mugen oil cap
Mugen carbon plug cover
Mugen resevoir socks
Spoon 70mm throttle body
Spoon 4-2 and 2-1 with de cat exhaust manifold
Hard pipe from air box to throttle body
FD2 intake manifold

cheers


Hi Mark

Do you need any more power??

If your car's already 256bhp you may 'just' get away with running it in the Nippon GT250, if not the next class is GT300 - Going to cost a bit to get up to 300bhp & you will need it to be compettive in the GT300 class.....
Just a thought to save you some ££££ :idea: ;)

Paul.
 

Guest
TypeRKid said:
BC Engine Builds:

BUDDYCLUB TA2009-305bhp 212.6ft/lb after a bit of tweeking. still more to come in the midrange.(still on a single plenum). New 2009 engine,BC-ST2 cams with altered timing,BC Vernier pullies, BC Titanium caps,BC valve springs,BC Modified head,BC stainless valves,BC header,spec3 pro system,RBC,BC70mm Billet TB,Hondata,BC LONG RAM Alloy Induction kit.

JT3173 - 275.3 bhp 189 lb/ft tourque at TDi North, KPRO, BC Spec 3 cams, modded RBC, BC 70mm throttle body, BC prototype CAI, 550 RC injectors, 87.5mm pistons, BC Pro Spec exhaust, Toda Racing manifold.(engine by Buddyclub of course...)

That VTEC Grin - 275.0bhp 187 lb/ft torque, KPRO, BC N+ Cams, Gruppe-M, BC 70mm Throttle Body, BC modified RBC manifold, Omega Forged Pistons 12.5.1, Toda Racing Manifold, Toda Racing Exhaust, (engine by Buddyclub)

BUDDYCLUB TA2008 275.2 bhp 218 ft/lb, k-pro,BC sp3 cams,RBC,BC Induction ram,BC springs,BC tit caps,BC pulleys,BC header,BC Pro Spec system,BC 70mm TB,

BUDDYCLUB- 274bhp 201 ft/lb torque, 2050cc Try Before You Buy road demo,omega pistons, ,SP3 cams,bc springs,bc header,bc pulleys ,sp4 system,BC filter,K-pro,440cc injectors.


________________________________________________________________________

K20A N/A Combinations with CAMS:

black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop

Type R Kid - 272.4bhp 174lb/ft torque,Kpro,Buddyclub N+ Camshafts and P1 Racing Titanium valve and valve springs,RBC Intake Manifold and Hondata Gasket,Buddyclub throttle body,Group M Intake,AEM TRU Power Pulley,Buddyclub Manifold,Spoon B Pipe,Spoon N1 backbox All work done by UNIT 8 :D

D@nCeR - 272.3 (186.4 lb/ft torque) GruppeM, Kpro, RBC intake+hondata gasket, Toda A3 Cams, J's Racing T/B, Toda Mani, Spoon B-Pipe,
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
________________________________________________________________________

K20A - N/A Combinations without Cams:

Mikegsi - 262.2bhp, 181ft/lb torque. Toda mani, gruppem, rbc, spoon tb, kakimoto regu 06&r, hondata heatshield, earthing kit, grounding position moved, shiny bits
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
DC5Dub07 - 255.3BHP 169.9 lb/ft torque Ai Autosports NI - Kpro, Gruppe M, RBC, DC sports header, 5ziegen catback.
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
Lockwood77 - 252.9bhp (174.6 lb/ft), TDi North, 6/4/09 - GruppeM, J's TB, RBC, Hondata heatshield gasket, Toda exhaust manifold and cat-back
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
Jayk "DC5 3 - 250hp (177 lb/ft torque) - Fujita F5, Toda Mani, Supersprint B-pipe, OEM Back Box, KPRO
Zen1 - 250bhp (171.2 lb/ft torque) Kpro, GruppeM, Piper 4-2-1 Mani +sports cat J's 60RS Catback, RBC, Hondata Gasket, TDI North 14/12/09
BENNY 249.2 BHP (178 LB TORQUE) KPRO, RBC, DC SPORTS MANI, HKS SILENT CATBACK, AEM V2 AND THATS IT! NO MORE!
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
Integradan - 245.1bhp (165.8 lbft) Kpro, J's Racing CAI, DC Sports Mani, Unknown JDM Exhaust - TDi North (12.06.09)
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back -
sydney- 242.7hp 223 whp (166lb/ft) proven. mugen n1 ecu, gruppe m, rbc with hondata heatshield, hks sparks, dc sports mani, j's racing exhaust (one that looks like toda)
TDI North 25/02/08
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
Mark_teg - 233.0bhp (166 lb/ft) DC Mani, GruppeM, Spoon B-pipe, OEM Backbox
Gaz DC5 - 231.3 (168.3lbft Torque) TDI 11/9/09. Mugen N1 ECU, RBC inlet with Hondata Gasket, Spoon 4-2 & 2-1, ITG drop in filter
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Garytc78 - 224 (152 lb/ft ) - AEM V2 mugen twin loop awesome gti 27th Sep 2008
Gaz1- 222.8 (148.7 lb/ft torque)
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215




Just updated with my figures :)
 

jay82

Advanced Member
Messages
2,185
BC Engine Builds:

BUDDYCLUB TA2009-305bhp 212.6ft/lb after a bit of tweeking. still more to come in the midrange.(still on a single plenum). New 2009 engine,BC-ST2 cams with altered timing,BC Vernier pullies, BC Titanium caps,BC valve springs,BC Modified head,BC stainless valves,BC header,spec3 pro system,RBC,BC70mm Billet TB,Hondata,BC LONG RAM Alloy Induction kit.

JT3173 - 275.3 bhp 189 lb/ft tourque at TDi North, KPRO, BC Spec 3 cams, modded RBC, BC 70mm throttle body, BC prototype CAI, 550 RC injectors, 87.5mm pistons, BC Pro Spec exhaust, Toda Racing manifold.(engine by Buddyclub of course...)

That VTEC Grin - 275.0bhp 187 lb/ft torque, KPRO, BC N+ Cams, Gruppe-M, BC 70mm Throttle Body, BC modified RBC manifold, Omega Forged Pistons 12.5.1, Toda Racing Manifold, Toda Racing Exhaust, (engine by Buddyclub)

BUDDYCLUB TA2008 275.2 bhp 218 ft/lb, k-pro,BC sp3 cams,RBC,BC Induction ram,BC springs,BC tit caps,BC pulleys,BC header,BC Pro Spec system,BC 70mm TB,

BUDDYCLUB- 274bhp 201 ft/lb torque, 2050cc Try Before You Buy road demo,omega pistons, ,SP3 cams,bc springs,bc header,bc pulleys ,sp4 system,BC filter,K-pro,440cc injectors.


________________________________________________________________________

K20A N/A Combinations with CAMS:

black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop

Type R Kid - 272.4bhp 174lb/ft torque,Kpro,Buddyclub N+ Camshafts and P1 Racing Titanium valve and valve springs,RBC Intake Manifold and Hondata Gasket,Buddyclub throttle body,Group M Intake,AEM TRU Power Pulley,Buddyclub Manifold,Spoon B Pipe,Spoon N1 backbox All work done by UNIT 8

D@nCeR - 272.3 (186.4 lb/ft torque) GruppeM, Kpro, RBC intake+hondata gasket, Toda A3 Cams, J's Racing T/B, Toda Mani, Spoon B-Pipe,
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
________________________________________________________________________

K20A - N/A Combinations without Cams:

Mikegsi - 262.2bhp, 181ft/lb torque. Toda mani, gruppem, rbc, spoon tb, kakimoto regu 06&r, hondata heatshield, earthing kit, grounding position moved, shiny bits
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
DC5Dub07 - 255.3BHP 169.9 lb/ft torque Ai Autosports NI - Kpro, Gruppe M, RBC, DC sports header, 5ziegen catback.
jay82 - 253.3bhp (162.8 lb/ft torque) Ai Autosports 4/03/10 - Kpro, GM, RBC, DC sports header, mugen twinloop
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
Lockwood77 - 252.9bhp (174.6 lb/ft), TDi North, 6/4/09 - GruppeM, J's TB, RBC, Hondata heatshield gasket, Toda exhaust manifold and cat-back
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
Jayk "DC5 3 - 250hp (177 lb/ft torque) - Fujita F5, Toda Mani, Supersprint B-pipe, OEM Back Box, KPRO
Zen1 - 250bhp (171.2 lb/ft torque) Kpro, GruppeM, Piper 4-2-1 Mani +sports cat J's 60RS Catback, RBC, Hondata Gasket, TDI North 14/12/09
BENNY 249.2 BHP (178 LB TORQUE) KPRO, RBC, DC SPORTS MANI, HKS SILENT CATBACK, AEM V2 AND THATS IT! NO MORE!
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
Integradan - 245.1bhp (165.8 lbft) Kpro, J's Racing CAI, DC Sports Mani, Unknown JDM Exhaust - TDi North (12.06.09)
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back -
sydney- 242.7hp 223 whp (166lb/ft) proven. mugen n1 ecu, gruppe m, rbc with hondata heatshield, hks sparks, dc sports mani, j's racing exhaust (one that looks like toda)
TDI North 25/02/08
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
Mark_teg - 233.0bhp (166 lb/ft) DC Mani, GruppeM, Spoon B-pipe, OEM Backbox
Gaz DC5 - 231.3 (168.3lbft Torque) TDI 11/9/09. Mugen N1 ECU, RBC inlet with Hondata Gasket, Spoon 4-2 & 2-1, ITG drop in filter
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Garytc78 - 224 (152 lb/ft ) - AEM V2 mugen twin loop awesome gti 27th Sep 2008
Gaz1- 222.8 (148.7 lb/ft torque)
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215
 

turbo5

Advanced Member
Messages
778
BC Engine Builds:

BUDDYCLUB TA2009-305bhp 212.6ft/lb after a bit of tweeking. still more to come in the midrange.(still on a single plenum). New 2009 engine,BC-ST2 cams with altered timing,BC Vernier pullies, BC Titanium caps,BC valve springs,BC Modified head,BC stainless valves,BC header,spec3 pro system,RBC,BC70mm Billet TB,Hondata,BC LONG RAM Alloy Induction kit.

JT3173 - 275.3 bhp 189 lb/ft tourque at TDi North, KPRO, BC Spec 3 cams, modded RBC, BC 70mm throttle body, BC prototype CAI, 550 RC injectors, 87.5mm pistons, BC Pro Spec exhaust, Toda Racing manifold.(engine by Buddyclub of course...)

That VTEC Grin - 275.0bhp 187 lb/ft torque, KPRO, BC N+ Cams, Gruppe-M, BC 70mm Throttle Body, BC modified RBC manifold, Omega Forged Pistons 12.5.1, Toda Racing Manifold, Toda Racing Exhaust, (engine by Buddyclub)

BUDDYCLUB TA2008 275.2 bhp 218 ft/lb, k-pro,BC sp3 cams,RBC,BC Induction ram,BC springs,BC tit caps,BC pulleys,BC header,BC Pro Spec system,BC 70mm TB,

BUDDYCLUB- 274bhp 201 ft/lb torque, 2050cc Try Before You Buy road demo,omega pistons, ,SP3 cams,bc springs,bc header,bc pulleys ,sp4 system,BC filter,K-pro,440cc injectors.


________________________________________________________________________

K20A N/A Combinations with CAMS:

black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop

Type R Kid - 272.4bhp 174lb/ft torque,Kpro,Buddyclub N+ Camshafts and P1 Racing Titanium valve and valve springs,RBC Intake Manifold and Hondata Gasket,Buddyclub throttle body,Group M Intake,AEM TRU Power Pulley,Buddyclub Manifold,Spoon B Pipe,Spoon N1 backbox All work done by UNIT 8

D@nCeR - 272.3 (186.4 lb/ft torque) GruppeM, Kpro, RBC intake+hondata gasket, Toda A3 Cams, J's Racing T/B, Toda Mani, Spoon B-Pipe,
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
________________________________________________________________________

K20A - N/A Combinations without Cams:

Mikegsi - 262.2bhp, 181ft/lb torque. Toda mani, gruppem, rbc, spoon tb, kakimoto regu 06&r, hondata heatshield, earthing kit, grounding position moved, shiny bits
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
DC5Dub07 - 255.3BHP 169.9 lb/ft torque Ai Autosports NI - Kpro, Gruppe M, RBC, DC sports header, 5ziegen catback.
jay82 - 253.3bhp (162.8 lb/ft torque) Ai Autosports 4/03/10 - Kpro, GM, RBC, DC sports header, mugen twinloop
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
Lockwood77 - 252.9bhp (174.6 lb/ft), TDi North, 6/4/09 - GruppeM, J's TB, RBC, Hondata heatshield gasket, Toda exhaust manifold and cat-back
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
Turbo5 -250.9bhp (170.9lb/ft) Dasteck Mark @ unit 8. 4/5/10 Kpro, Gruppe M, Mugen manifold with Mugen sports cat, RBC intake, hondata heatshield gasket, Toda exhaust.
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
Jayk "DC5 3 - 250hp (177 lb/ft torque) - Fujita F5, Toda Mani, Supersprint B-pipe, OEM Back Box, KPRO
Zen1 - 250bhp (171.2 lb/ft torque) Kpro, GruppeM, Piper 4-2-1 Mani +sports cat J's 60RS Catback, RBC, Hondata Gasket, TDI North 14/12/09
BENNY 249.2 BHP (178 LB TORQUE) KPRO, RBC, DC SPORTS MANI, HKS SILENT CATBACK, AEM V2 AND THATS IT! NO MORE!
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
Integradan - 245.1bhp (165.8 lbft) Kpro, J's Racing CAI, DC Sports Mani, Unknown JDM Exhaust - TDi North (12.06.09)
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back -
sydney- 242.7hp 223 whp (166lb/ft) proven. mugen n1 ecu, gruppe m, rbc with hondata heatshield, hks sparks, dc sports mani, j's racing exhaust (one that looks like toda)
TDI North 25/02/08
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
Mark_teg - 233.0bhp (166 lb/ft) DC Mani, GruppeM, Spoon B-pipe, OEM Backbox
Gaz DC5 - 231.3 (168.3lbft Torque) TDI 11/9/09. Mugen N1 ECU, RBC inlet with Hondata Gasket, Spoon 4-2 & 2-1, ITG drop in filter
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Garytc78 - 224 (152 lb/ft ) - AEM V2 mugen twin loop awesome gti 27th Sep 2008
Gaz1- 222.8 (148.7 lb/ft torque)
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215
 

Rob84

Advanced Member
Messages
245
BC Engine Builds:

BUDDYCLUB TA2009-305bhp 212.6ft/lb after a bit of tweeking. still more to come in the midrange.(still on a single plenum). New 2009 engine,BC-ST2 cams with altered timing,BC Vernier pullies, BC Titanium caps,BC valve springs,BC Modified head,BC stainless valves,BC header,spec3 pro system,RBC,BC70mm Billet TB,Hondata,BC LONG RAM Alloy Induction kit.

JT3173 - 275.3 bhp 189 lb/ft tourque at TDi North, KPRO, BC Spec 3 cams, modded RBC, BC 70mm throttle body, BC prototype CAI, 550 RC injectors, 87.5mm pistons, BC Pro Spec exhaust, Toda Racing manifold.(engine by Buddyclub of course...)

That VTEC Grin - 275.0bhp 187 lb/ft torque, KPRO, BC N+ Cams, Gruppe-M, BC 70mm Throttle Body, BC modified RBC manifold, Omega Forged Pistons 12.5.1, Toda Racing Manifold, Toda Racing Exhaust, (engine by Buddyclub)

BUDDYCLUB TA2008 275.2 bhp 218 ft/lb, k-pro,BC sp3 cams,RBC,BC Induction ram,BC springs,BC tit caps,BC pulleys,BC header,BC Pro Spec system,BC 70mm TB,

BUDDYCLUB- 274bhp 201 ft/lb torque, 2050cc Try Before You Buy road demo,omega pistons, ,SP3 cams,bc springs,bc header,bc pulleys ,sp4 system,BC filter,K-pro,440cc injectors.


________________________________________________________________________

K20A N/A Combinations with CAMS:

black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop

Type R Kid - 272.4bhp 174lb/ft torque,Kpro,Buddyclub N+ Camshafts and P1 Racing Titanium valve and valve springs,RBC Intake Manifold and Hondata Gasket,Buddyclub throttle body,Group M Intake,AEM TRU Power Pulley,Buddyclub Manifold,Spoon B Pipe,Spoon N1 backbox All work done by UNIT 8

D@nCeR - 272.3 (186.4 lb/ft torque) GruppeM, Kpro, RBC intake+hondata gasket, Toda A3 Cams, J's Racing T/B, Toda Mani, Spoon B-Pipe,
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
________________________________________________________________________

K20A - N/A Combinations without Cams:

Mikegsi - 262.2bhp, 181ft/lb torque. Toda mani, gruppem, rbc, spoon tb, kakimoto regu 06&r, hondata heatshield, earthing kit, grounding position moved, shiny bits
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
DC5Dub07 - 255.3BHP 169.9 lb/ft torque Ai Autosports NI - Kpro, Gruppe M, RBC, DC sports header, 5ziegen catback.
Rob84 - 254bhp, 172.9lb/ft - Unit 8 mapped, K-Pro, RBC with Hondata inlet gasket, Gruppe M, BC Pro Spec cat-back
jay82 - 253.3bhp (162.8 lb/ft torque) Ai Autosports 4/03/10 - Kpro, GM, RBC, DC sports header, mugen twinloop
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
Lockwood77 - 252.9bhp (174.6 lb/ft), TDi North, 6/4/09 - GruppeM, J's TB, RBC, Hondata heatshield gasket, Toda exhaust manifold and cat-back
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
Turbo5 -250.9bhp (170.9lb/ft) Dasteck Mark @ unit 8. 4/5/10 Kpro, Gruppe M, Mugen manifold with Mugen sports cat, RBC intake, hondata heatshield gasket, Toda exhaust.
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
Jayk "DC5 3 - 250hp (177 lb/ft torque) - Fujita F5, Toda Mani, Supersprint B-pipe, OEM Back Box, KPRO
Zen1 - 250bhp (171.2 lb/ft torque) Kpro, GruppeM, Piper 4-2-1 Mani +sports cat J's 60RS Catback, RBC, Hondata Gasket, TDI North 14/12/09
BENNY 249.2 BHP (178 LB TORQUE) KPRO, RBC, DC SPORTS MANI, HKS SILENT CATBACK, AEM V2 AND THATS IT! NO MORE!
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
Integradan - 245.1bhp (165.8 lbft) Kpro, J's Racing CAI, DC Sports Mani, Unknown JDM Exhaust - TDi North (12.06.09)
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back -
sydney- 242.7hp 223 whp (166lb/ft) proven. mugen n1 ecu, gruppe m, rbc with hondata heatshield, hks sparks, dc sports mani, j's racing exhaust (one that looks like toda)
TDI North 25/02/08
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
Mark_teg - 233.0bhp (166 lb/ft) DC Mani, GruppeM, Spoon B-pipe, OEM Backbox
Gaz DC5 - 231.3 (168.3lbft Torque) TDI 11/9/09. Mugen N1 ECU, RBC inlet with Hondata Gasket, Spoon 4-2 & 2-1, ITG drop in filter
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Garytc78 - 224 (152 lb/ft ) - AEM V2 mugen twin loop awesome gti 27th Sep 2008
Gaz1- 222.8 (148.7 lb/ft torque)
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215
 

Mark_teg

Moderator
Staff member
Messages
4,356
BC Engine Builds:

BUDDYCLUB TA2009-305bhp 212.6ft/lb after a bit of tweeking. still more to come in the midrange.(still on a single plenum). New 2009 engine,BC-ST2 cams with altered timing,BC Vernier pullies, BC Titanium caps,BC valve springs,BC Modified head,BC stainless valves,BC header,spec3 pro system,RBC,BC70mm Billet TB,Hondata,BC LONG RAM Alloy Induction kit.

JT3173 - 275.3 bhp 189 lb/ft tourque at TDi North, KPRO, BC Spec 3 cams, modded RBC, BC 70mm throttle body, BC prototype CAI, 550 RC injectors, 87.5mm pistons, BC Pro Spec exhaust, Toda Racing manifold.(engine by Buddyclub of course...)

That VTEC Grin - 275.0bhp 187 lb/ft torque, KPRO, BC N+ Cams, Gruppe-M, BC 70mm Throttle Body, BC modified RBC manifold, Omega Forged Pistons 12.5.1, Toda Racing Manifold, Toda Racing Exhaust, (engine by Buddyclub)

BUDDYCLUB TA2008 275.2 bhp 218 ft/lb, k-pro,BC sp3 cams,RBC,BC Induction ram,BC springs,BC tit caps,BC pulleys,BC header,BC Pro Spec system,BC 70mm TB,

BUDDYCLUB- 274bhp 201 ft/lb torque, 2050cc Try Before You Buy road demo,omega pistons, ,SP3 cams,bc springs,bc header,bc pulleys ,sp4 system,BC filter,K-pro,440cc injectors.


________________________________________________________________________

K20A N/A Combinations with CAMS:

black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop

Type R Kid - 272.4bhp 174lb/ft torque,Kpro,Buddyclub N+ Camshafts and P1 Racing Titanium valve and valve springs,RBC Intake Manifold and Hondata Gasket,Buddyclub throttle body,Group M Intake,AEM TRU Power Pulley,Buddyclub Manifold,Spoon B Pipe,Spoon N1 backbox All work done by UNIT 8

D@nCeR - 272.3 (186.4 lb/ft torque) GruppeM, Kpro, RBC intake+hondata gasket, Toda A3 Cams, J's Racing T/B, Toda Mani, Spoon B-Pipe,
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
________________________________________________________________________

K20A - N/A Combinations without Cams:

Mikegsi - 262.2bhp, 181ft/lb torque. Toda mani, gruppem, rbc, spoon tb, kakimoto regu 06&r, hondata heatshield, earthing kit, grounding position moved, shiny bits
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
DC5Dub07 - 255.3BHP 169.9 lb/ft torque Ai Autosports NI - Kpro, Gruppe M, RBC, DC sports header, 5ziegen catback.
Rob84 - 254bhp, 172.9lb/ft - Unit 8 mapped, K-Pro, RBC with Hondata inlet gasket, Gruppe M, BC Pro Spec cat-back
jay82 - 253.3bhp (162.8 lb/ft torque) Ai Autosports 4/03/10 - Kpro, GM, RBC, DC sports header, mugen twinloop
Mark_teg - 253.2bhp (168 lb/ft) - Eightspeed 20/07/10 - Kpro, GruppeM, RBC with Hondata gasket, DC header, Spoon B-pipe, OEM Backbox
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
Lockwood77 - 252.9bhp (174.6 lb/ft), TDi North, 6/4/09 - GruppeM, J's TB, RBC, Hondata heatshield gasket, Toda exhaust manifold and cat-back
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
Turbo5 -250.9bhp (170.9lb/ft) Dasteck Mark @ unit 8. 4/5/10 Kpro, Gruppe M, Mugen manifold with Mugen sports cat, RBC intake, hondata heatshield gasket, Toda exhaust.
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
Jayk "DC5 3 - 250hp (177 lb/ft torque) - Fujita F5, Toda Mani, Supersprint B-pipe, OEM Back Box, KPRO
Zen1 - 250bhp (171.2 lb/ft torque) Kpro, GruppeM, Piper 4-2-1 Mani +sports cat J's 60RS Catback, RBC, Hondata Gasket, TDI North 14/12/09
BENNY 249.2 BHP (178 LB TORQUE) KPRO, RBC, DC SPORTS MANI, HKS SILENT CATBACK, AEM V2 AND THATS IT! NO MORE!
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
Integradan - 245.1bhp (165.8 lbft) Kpro, J's Racing CAI, DC Sports Mani, Unknown JDM Exhaust - TDi North (12.06.09)
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back -
sydney- 242.7hp 223 whp (166lb/ft) proven. mugen n1 ecu, gruppe m, rbc with hondata heatshield, hks sparks, dc sports mani, j's racing exhaust (one that looks like toda)
TDI North 25/02/08
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
Gaz DC5 - 231.3 (168.3lbft Torque) TDI 11/9/09. Mugen N1 ECU, RBC inlet with Hondata Gasket, Spoon 4-2 & 2-1, ITG drop in filter
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Garytc78 - 224 (152 lb/ft ) - AEM V2 mugen twin loop awesome gti 27th Sep 2008
Gaz1- 222.8 (148.7 lb/ft torque)
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215
 
Top