Camber bolts for front...
Take out the top bolt holding the bottom of your shock to the hub, install camber bolt, i believe if you have the metal tab towards the car you get more negative and away from the car more positive camber.
Loosen the lower shock bolt and it will allow you to adjust the geo.
Rear arms
Remove your existing arm, 2 bolts 14mm i believe up jnto the underneath of the car and 1x19mm into the top.of the hub. There maybe be abs sensors attached to the current arm which you will have to cable tie back to the new arm when installed.
Fit new arm by reversing the above.
Loosen the two locking nuts on the arm and adjust accordingly for positive or negative camber
Sent from my SM-A320FL using Tapatalk