stefanmcc99
Member
- Messages
- 12
I would just drill it out and put an M6 bolt through with a nut on the inside. I had to give one of mine a little heat to get it to budge but luckily it came off ok.gaza4 said:Just ordered new seals and brackets myself from Tegiwa over the weekend.
Both my brackets are in bad shape with the inner mounting points on both sides completely broken off. Sheared off the mounting stud in the process of removing the broken piece. Not sure how to get around that one!!!
As for the two starhead screws which hold the brackets onto the bottoms of the tail lights did yours come out okay? mine wont budge so im letting them soak in wd40 until the new brackets arrive.