TDI say you can do this as the cams I had fitted will rev out a little more than the oem ones but I didn‘t do this which is a bit of a regret...But that said it‘s also upping the cost; if I‘d have done this I may as well have gone for some more agreesive cams I think.
Someone will pop up with...
Hey
It wasn‘t actually done by TDI; I just bought the cams and had TGM fit them and Romain map it at Surrey Rolling Road.... so I‘m not actually sure what it would make at TDI
I was recommended to change the intake to the inzgen cold air one but I live in an area prone to flooding so I‘ve...
Finally got everything fitted and mapped today and I‘m quite happy with the result
Mods -
TDI North Stage 2 DIC‘s
Solid fabrications big bore manifold
Solid fabrications 3inch exhaust
Mugen intake
J‘s Racing scoop
RRC manifold ported to 70mm
Skunk 2 70mm throttle body
K100
End result was...
I think tdi north now only make the stage two cams which have a larger lobe on the low cam which gave about 10lbft of torque increase on standard cam on the two dyno graphs I've found. Potentially may have a set to play with soon =]
Hey
I realise there is a bunch or info in the search thread but nothing on if the lower price drop in skunk 2 or drag cartel cams etc are going to produce results like the tdi drop in's? Anyone know or tried any of the cheaper ones? Or is it a pay for what you get situation
Any help welcome...
Lucky it passed in the end... apparently it was the second idle test it was failing on Honda had it from 9am and after several calls were still saying it was failing at 4pm ( don't ask how many times they tested it or why it took so long because I can't tell you! Ha ) apparently then a different...
It's the full system header though to twin loop, I paid a fortune for it few years back so I'm hoping a can of summit in the tank and a good run will help it pass! If not I'll be gutted!
Afternoon guys
Has anyone ever had to or heard of the sports cat on a Mugen system needing to be replaced? if so what were the options? Mines just failed its MOT on emissions.... I feel my overdraft is about to take a beating!
Cheers
Garerh
Anyone know the spring rates on Eibach Pro streets? I had some fitted about 12months ago and I can't help but feel I've ruined the car on anything but smooth roads. I have got thicker arb's debating changing them back to standard to try and help.
I have the progress 24mm rear and ultra racing 25mm front with eibach coil overs; I love it =] I went for the two because as I understand it the rear introduces oversteer at its limits.. so by stiffening the front as well your increasing the roll rigidity of the whole car so retaining the cars...