Search results

So any Gruppe M owners out there, how often do you use the cleaning kit to clean up the induction cone? How long did you leave it from the time it was fitted until you cleaned it? Also was it fairly dirty and did cleaning it make any difference?

"Borrowed from another Site": :P What do RCAs do? RCAs - Roll Center Adjusters, also called "Bump Steer Spacers" - are designed to eliminate "bump steer". Bump steer is when your wheels steer themselves without input from the steering wheel. This undesirable steering is caused by bumps in...

Not sure if this has been covered much, basically to anyone who has had STG2 cams fitted, and how it affected emissions when it came to MOT time... was there a massive increase in emissions? Or would it be the case that you can just get a map with less fueling etc to get past the test when it...

Just looking for some opinions on this... Symptoms are that under acceleration in corners there is a vibration/shudder/wobble in the car, noticeable when cornering(left or right) when the accelerator is down. Also noticeable under acceleration in a straight line, esp.when coming up and around...

Anyone know the weight of a set of Tein Flex coilovers? (for shipping purposes)

Just a question on the ride height of the facelifted DC5, the back seems higher than the front, and thats with standard shocks and springs, dont know if this is normal? Also what springs would owners of F/L DC5's recommend? Dont want to drop it to the deck, but just enough to leave a small but...

Hi, anyone have a p/n for front camber bolts, Eibach ones pls!

Anyone know if the OEM wheels CW paint finish is Matt? (as opposed to gloss)

Have a set of Tein Type Flex, just wonder how many clicks would be good for the track? Ive currently got them as standard; 12 clicks from hardest setting on front and rear. I've heard that the backs should be set stiffer than the fronts? :xconfused:

http://www.autocar.co.uk/News/NewsArtic ... ts/236594/ Looks like Honda are moving away from hi-performance cars now that their won't be a new NSX. What's next for Honda? Looks like Honda see's there future in environmentaly friendly cars that appeal to the mass-market, esp. as they also move...

Anyone out there know the p/n for a SAMCO replacement for the Oem air intake arm, mines ripped and i need a new one quick...

Hi, has anyone fitted one of these to their DC5? I bought one and tryed to fit it today with no luck :( ...removed the OEM Bar ..the Spoon brackets fit in fine, however the Spoon bar is about 1/2 an inch too short and won't fit in securely :? Part number on the box is: 74310-DC5-000 Help!

Just wondering if anyone has made the swap from a DC Sports to a Toda exhaust Manifold and has it added anymore proven WHP or Torque figures on the dyno? :?:

Hey... anyone using or have used these tyres? How long do they take to "scrub in", ive only done around 100km's with them so far, but the grip in the wet is rubbish, dry is better but not great....

Hi, ive been looking into ordering Stage 1 Cams from the States and have narrowed it down to 3 choices, Skunk2, Brian Crower or Buddy Club.. All coming in at around €365 shipped... My question is which brand of cams would people recommend?

Hi.. just wondering if anyone had seen the new Js Racing induction kit? Looks amazing, lots of carbon fibre with a cold air feed coming from the front just underneath the bonnet on the passenger side.. The pictures on the site are one of the facelift model.. but im sure its fine for the...