Search results

thought id share - most probs a repost :) https://www.bespokeoffers.co.uk/consumer/offers/save-5p-per-litre-on-v-power-nitro-fuel-at-shell--c73b2

Has anyone tried these ? http://www.tyretraders.com/tyreInformation%7CItemID%7CBRI21545R1791WRE002.html

Rear right caliper seizing.... took both apart today and found the slide pins a little stuck... lucky not too much but I could feel the car dragging. Cleaned all pads and retainers, slide pins re lubed everything and even readjusting the hand brake too. now was going to go for a test...

http://www.eurocarparts.com/ecp/c/Honda_Integra+Coupe_2.0_2002/p/car-parts/brakes/brake-friction/brake-disc/?104600468&1&0adba7f08e0a192fff8dd226b73341736357c454&000027 £68.04 for the pair....very cheap with there 30% discount

Hi Guys, I normally get 300+ out of a full tank but these last 3-4 tanks only getting 280 ish.. and thats not even booting the car. Before I can get anything between 330-380 out of a tank with mixed driving. Same usual route to work and nothings changed. I have cleaned my Injen filter as I...

well my old mans CLK has been sitting on the driveway for the past 3 years and as you can imagine it could do with some TLC :) The windows had moss and weed growing out of it thats how bad it was. So I decided to fix it up and get the car running again for the summer. Last week I stripped all...

Got a friend who insured there car with ecar insurance and cancelled within the cooling period of 14 days. purchased on 1st mar cancelled on 7th. The insurance company are being right w8nkers as they said at the time of purchase my friend stated that he had 5 years no claims and had to send...

whats total toe = -0.20deg in mm is this right ? 17" = 431.79mm x pi/360 = 3.76mm per deg / 5 = 0.75mm? i think i got the calculation right ? so total toe out = -0.75mm

if i had a minor accident ie slight scuff and i've told my insurance company about it but neither myself or the 3rd party have claimed against each other do I have to still mention this on my online quotes ?

B&Q -10quid for 4 Litres.. http://www.diy.com/diy/jsp/bq/nav.jsp?a ... egories%3C{9372016}/categories%3C{9372052}/categories%3C{9372284}/specificationsProductType=engine_oil&tmcampid=4&tmad=c&ecamp=cse_go&CAWELAID=345455515

Hi Guys, quick q.. does the DC5 Jap Manual say to pre-gap the plugs to 1.1mm Thanks,

just had 4 of these fitted today.. not bad I must say. just have to wear them in a little then see how they perform. initial steering and feedback feel great. I couldnt decide which to get v12's or S1's - v12's better in wet I see the reviews but S1's better dry performance.

hi guys, could i install this without taking the front bumper off ? would i get away just taking the wheel and lining off and have access to take the washer bottle etc out..

it looks like TGM have set more camber on rear then front.. any reason for this ? front - total toe out 0.8mm camber each side -1 deg rear - total toe in 1.2mm camber each side -1.2 am i reading these correctly .. from reading here the front camber should be more then the rear ? im...

now these look pretty much the same .. 7.5 x 17 et 42 http://www.inovit-alloy-wheels.co.uk/pr ... cd003220b6 would these fit the dc5 with et 42

whats the oem thickness of the front discs new ?

Hi Guys, i need to replace the rear wheel stud how do I take the existing one out ? one of my wheel nuts snapped in half and now i cant get them out so i was gonna drill through the stud. Do they just hammer out through the front or are they the type which are welded on ?

whats the nut spec to fit these rota wheels ? m12x1.5 60mm or m12x1.25 60mm....

how many bolts behind the calliper to get to the discs ?

Any one using spoon pads with oem discs ? waiting to fit these over the weekend :)