most powerfull na car on here ??

J

Jayk

Advanced Member
Messages
1,144
S80PERteg said:
Steven hawkins got 300bhp at the rear wheels of his chair on TDis dyno so it must be accurate!
Click to expand...
ah dude you kill me, does he wear a hans device when driving that? :lol: :lol: :lol:
 
M

MJ Type-R

Advanced member
Messages
1,578
kingston said:
its not actually you as you don’t tend to share the knowledge you’ve learnt due to contractual reasons
Click to expand...
Thanks James 8)

Welll... just to add.... today I got my hands very dirty...

Playing with my new EK4 track toy :D

At 6am this morning..... started to remove them rear interior... then thought... why go half hog :lol: so, by 9am... the interior all bar the front seats (in fact, these came out.. then back in) was removed 8)

I can't believe how much bloody sound dead stuff their is :shock: not got time to remove this yet....

So.. I then get round to the covered Pit if have access to,,,, front brakes cam off... but the new Dixcel discs didn't fit correct.... after investigating.. the OEM's are 21mm think.. the dixcel 23mm... but... they still sit the same.. so the discs classed.. we tried one way to solve... but no good... the carriers are now away having 2mm taken off the mount area.. should be done by mid day... (it had better be :wink: ).

After this... I then removed the Aircon system.... not that hard... and yes.. the green house gas was released in a controlled manner :?

Next was to upgrade the rad to a full size DC2 unit.. a little more tricky... the rad is currently held in place with good old cable ties... when I gat a chance.. I'll sort that out... but for now ok :)

So.. my hands were well used today :lol:

Mike
 
J

Jayk

Advanced Member
Messages
1,144
MJ Type-R said:
kingston said:
its not actually you as you don’t tend to share the knowledge you’ve learnt due to contractual reasons
Click to expand...
Thanks James 8)

Welll... just to add.... today I got my hands very dirty...

Playing with my new EK4 track toy :D

At 6am this morning..... started to remove them rear interior... then thought... why go half hog :lol: so, by 9am... the interior all bar the front seats (in fact, these came out.. then back in) was removed 8)

I can't believe how much bloody sound dead stuff their is :shock: not got time to remove this yet....

So.. I then get round to the covered Pit if have access to,,,, front brakes cam off... but the new Dixcel discs didn't fit correct.... after investigating.. the OEM's are 21mm think.. the dixcel 23mm... but... they still sit the same.. so the discs classed.. we tried one way to solve... but no good... the carriers are now away having 2mm taken off the mount area.. should be done by mid day... (it had better be :wink: ).

After this... I then removed the Aircon system.... not that hard... and yes.. the green house gas was released in a controlled manner :?

Next was to upgrade the rad to a full size DC2 unit.. a little more tricky... the rad is currently held in place with good old cable ties... when I gat a chance.. I'll sort that out... but for now ok :)

So.. my hands were well used today :lol:

Mike
Click to expand...
Flipping help, got up at 6am to stip out your car! I dont see day till at least 8am! Fairplay to you!
 
N

Newty

Advanced Member
Messages
297
Why ain't sommit like this a sticky?!!

G -Mac - 274 bhp 176 lb/ft torque, K-pro, Toda A3 cams, RBC, Gruppe M etc etc mapped on 97 RON also needs a tweek
black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back - TDI North 25/02/08
lockwood77 - 243 (158 lb/ft torque)
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
benny - 240 (183 lb/ft torque)
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 3 - 227 (166 lb/ft torque) - K&N Panel Filter, Toda Mani, Supersprint B-pipe
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Gaz1- 222.8 (148.7 lb/ft torque)
D@nCeR - 222.3 (148.4 lb/ft torque) GruppeM
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215[/b]
 
R

raz786

Advanced Member
Messages
1,887
Hey Newty, nice figures mate, am I right in saying that you gained 10bhp from the BC Exhaust alone? 8)
 
N

Newty

Advanced Member
Messages
297
dc5ian said:
Newty said:
Why ain't sommit like this a sticky?!!
Click to expand...

cos its not very accurate
Click to expand...
Yeah...don't want to start another lengthy debate amongst you die hards...should still be a sticky though.

raz786 said:
Hey Newty, nice figures mate, am I right in saying that you gained 10bhp from the BC Exhaust alone? 8)
Click to expand...
Erm, not too sure about that. The first time I went, I had a knackered Lambda sensor and was running unleaded (now shell optimax..thanks to the local garage!). I am not sure how much difference this makes TBH. The pro's might know...
 
N

Newty

Advanced Member
Messages
297
Actually, I just looked at my new dyno sheet and I got 240.5 hp....I should have moved up an extra place!!! :lol:
 
lockwood77

lockwood77

Advanced Member
Messages
1,160
Updated:

G -Mac - 274 bhp 176 lb/ft torque, K-pro, Toda A3 cams, RBC, Gruppe M etc etc mapped on 97 RON also needs a tweek
black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
Lockwood77 - 252.9bhp (174.6 lb/ft), TDi North, 6/4/09 - GruppeM, J's TB, RBC, Hondata heatshield gasket, Toda exhaust manifold and cat-back
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back - TDI North 25/02/08
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
benny - 240 (183 lb/ft torque)
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 3 - 227 (166 lb/ft torque) - K&N Panel Filter, Toda Mani, Supersprint B-pipe
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Gaz1- 222.8 (148.7 lb/ft torque)
D@nCeR - 222.3 (148.4 lb/ft torque) GruppeM
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215
 
A

alucardo

Advanced Member
Messages
687
Updated:

G -Mac - 274 bhp 176 lb/ft torque, K-pro, Toda A3 cams, RBC, Gruppe M etc etc mapped on 97 RON also needs a tweek
black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
Lockwood77 - 252.9bhp (174.6 lb/ft), TDi North, 6/4/09 - GruppeM, J's TB, RBC, Hondata heatshield gasket, Toda exhaust manifold and cat-back
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back - TDI North 25/02/08
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
benny - 240 (183 lb/ft torque)
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
alucardo - 233.2 (164lbft) TDI North Kpro, spoon 4-2, oem 2-1 and cat, Mugen twinloop, GruppeM....
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 3 - 227 (166 lb/ft torque) - K&N Panel Filter, Toda Mani, Supersprint B-pipe
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Gaz1- 222.8 (148.7 lb/ft torque)
D@nCeR - 222.3 (148.4 lb/ft torque) GruppeM
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215
 

Guest
lockwood77 said:
Updated:

BUDDYCLUB-275.2 bhp 218.6 ft/lb torque (at Tdi) Race car, ST2 cams,BC header,spec3 Pro,RBC,BC 70mm TB,Hondata,BC Carbon intake box,
G -Mac - 274 bhp 176 lb/ft torque, K-pro, Toda A3 cams, RBC, Gruppe M etc etc mapped on 97 RON also needs a tweek
black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
BUDDYCLUB- 270bhp 208 ft/lb torque, Try Before You Buy road demo ,SP3 cams,header,sp4 system,BC filter,K-pro,
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
Lockwood77 - 252.9bhp (174.6 lb/ft), TDi North, 6/4/09 - GruppeM, J's TB, RBC, Hondata heatshield gasket, Toda exhaust manifold and cat-back
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back - TDI North 25/02/08
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
benny - 240 (183 lb/ft torque)
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 3 - 227 (166 lb/ft torque) - K&N Panel Filter, Toda Mani, Supersprint B-pipe
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Gaz1- 222.8 (148.7 lb/ft torque)
D@nCeR - 222.3 (148.4 lb/ft torque) GruppeM
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215
Click to expand...
Updated again.
Paul,
 
I

ian.herm01

Advanced Member
Messages
511
Paul,

Is there a bit of smoke and mirrors here with your figures, i recall in another thread you have had an over bore so strickly speaking the CC is not the same as the others.
 

Guest
ian.herm01 said:
Paul,

Is there a bit of smoke and mirrors here with your figures, i recall in another thread you have had an over bore so strickly speaking the CC is not the same as the others.
Click to expand...
Sorry, :oops: I didnt realise it was a restricted regulations thread.? does everyone have to have exactly the same modifications?
Ive looked right back to the begining of the thread in 2006 and I cant find any exclusions for any mods at all (including a rebore or stroking for that matter), exept Turbos or chargers of course because it says "most powerfull NA car". so I guess anything goes right :D . If the moderators dissagree Ill take the post off :( . There is no smoke or mirrors??, the figures on the graphs speak for themselves, we cant cheat the Dyno.

The very first post asks if anyone has ITBs but I dont see any as yet in the bad boys list ;)

Regards,
Paul,
 
LeeH

LeeH

Advanced Member
Messages
3,079
OP stated NA. No restrictions paul :wink:

Just state your mods list. :idea:
 
mikegsi

mikegsi

Moderator
Staff member
Messages
6,095
its still NA so fine to include imo!


mine is well out of date, not owned that car for almost two years now, and i know its since had rbc put on to tweak it further

my current teg is standard other than gm and cat back so wont be any more than stock putting me nicely towards the bottom of the list :xlol:
 
D

Dc5Dub07

Advanced Member
Messages
833
lockwood77 wrote:
Updated:

BUDDYCLUB-275.2 bhp 218.6 ft/lb torque (at Tdi) Race car, ST2 cams,BC header,spec3 Pro,RBC,BC 70mm TB,Hondata,BC Carbon intake box,
G -Mac - 274 bhp 176 lb/ft torque, K-pro, Toda A3 cams, RBC, Gruppe M etc etc mapped on 97 RON also needs a tweek
black teg - 273bhp 172 lb/ft torque K-pro, Toda A2 cams, RBC intake, Gruppe M CAI, Spoon T/B, Toda Manifold, Mugen Twinloop
Stevieg - 271.8Bhp / 185.6 lb-ft Torque (needs a tweek!) K-pro, Toda A3 Cams, RBC IM, Gruppe M, FGK RM01A Exhaust
BUDDYCLUB- 270bhp 208 ft/lb torque, Try Before You Buy road demo ,SP3 cams,header,sp4 system,BC filter,K-pro,
Zero7 - 262 (I think)
Davy 01cw5 - 261bhp 180lb/ft (proven)
monz - 261 (approx.)
LeeH 260.8bhp 179.7lb/ft TDi North 26/11/07 BC Spec IV, BC Mani, RBC Intake, GruppeM, KPRO, Spoon socks
C&S Evo 7 - 260.6
DC5Dub07 - 255.3BHP 169.9 lb/ft torque Ai Autosports NI - Kpro, Gruppe M, RBC, DC sports header, 5ziegen catback.
Neil_integra - 253hp (179lb/ft torque) 19.02.08 Kpro, Mugen manifold, mugen sports cat, mugen twinloop, AEM CAI, skimmed head, toda high compression head gasket, hondata intake manifold gasket, RBC intake + 440 injectors.
Lockwood77 - 252.9bhp (174.6 lb/ft), TDi North, 6/4/09 - GruppeM, J's TB, RBC, Hondata heatshield gasket, Toda exhaust manifold and cat-back
JCW - 252bhp (185.1 lb/ft torque) Kpro, GruppeM, Mugen Mani, Mugen exh, RBC, J's tb
Mikegsi - 251 (192 lb/ft torque too!!)
celox performance - 250 (178 lb/ft torque) Kpro, ITG Maxogen, BC Header, RBC
p_r_e - 248 (159 lb/ft torque)
Jayk DC5 2 - 248 (180 lb/ft torque) Gruppe-M, Toda Mani, Toda Exhaust, Kpro
webbie - 247 (199 lb/ft torque)
tron2k3 - 245.9 (175 lb/ft torque) KPro, GruppeM, Toda Mani, Toda Exh - TDi North 10/12/2007 Time:11:45:33
The Mofo - 244.4 (170lb/ft torque) Kpro, Injen CAI, Toda Mani, Fujitsubo Legalis R cat back - TDI North 25/02/08
12T - 242.4 (170.3 lb/ft torque)
stoddie - 242.1 (164.8 lb/ft torque)japerformance. GruppeM, twin loop, rbc, maxim works manifold
milano_chris - 241.7 (170.4 lb/ft torque) KPro, GruppeM, Toda Mani, T1R 63mm cat-back - TDI North 18/10/07
Sinbad - 241.3 (171.7 lb/ft torque) Kpro, GruppeM, DC Mani, Apexi N1 - TDI North 02/11/07
BadBadtz - 241.2 (166 lb/ft torque)
linzi94 - 240.6 aem cai, full spoon n1
benny - 240 (183 lb/ft torque)
Newty: 240hp/168torque, TDI North 23/02/09...KPro, Toda Mani, BuddyClub Exhaust, GruppeM...
Jimmi27- 233.7 (170.5lbft) KPro, Mugen/5zigen, HKS cat back. System-R 2/5/2007
Newty - 230 (167.3 lb/ft), TDI North 25/6/08, KPro, Toda Mani, Powerflow CAT back, GruppeM...to follow, proper exhaust(!), RBC intake...more fidling!!!
Jayk "DC5 3 - 227 (166 lb/ft torque) - K&N Panel Filter, Toda Mani, Supersprint B-pipe
Jayk "DC5 1- 225 (165 lb/ft torque) - K&N Panel Filter, Toda Mani, Spoon B Pipe
Gaz1- 222.8 (148.7 lb/ft torque)
D@nCeR - 222.3 (148.4 lb/ft torque) GruppeM
Frank - 221 (156lb/ft torque)
Stuart_M - 220.3 (158.4lb/ft torque) DC Sports cat back. TDI 04/07
Dazza - 219.0(160.8 lb/ft torque)
gaz3434 - 218.2 (156.0 lb/ft torque) - stock except for Spoon drop-in filter!
RSX Type S - 215
 
You must log in or register to reply here.
Top