Search results

Just booked on for 21st april with javelin Anybody else fancy it?

Hi As the old ad08 are no longer available, i have had to buy a pair of ad08R in 245/40/17 My dilemma is, which way shall i run them? -Old tyres on the rear with the new compound on the front or vice versa? The new R is grippier hence why i was thinking of running them on the front. -run...

hi if someone has this setup could i ask you to measure the width of the tyre across the tread? and possibly show a picture of the height of the sidewall? i want to change my tyre sizes. i would like to go with ad08 again but cant decide whether to choose the bridgestone re002 as a cheaper...

Im after a near side tie rod and inner joint for the teg. Cant find any so i was wondering if the ep3 tie rod is the same and ill just swap my tie rod end on to it Mike

http://youtu.be/HCT_lXZxs10 the legend! and his footwork in a standard 5 from nearly 12 years ago

.....well thats what millers are saying http://www.millersoils.co.uk/news/2012/281112-Toyota-GT86-Power-Test.asp tested on a new gt86, i think i may give it a go when i next service the teg

Just been browsing and stumbled across a build thread for a japanese dc5. Thats when i saw these http://www.nagisa-auto.com/products/honda/civic_integra.html the build is here http://honda-tech.com/showthread.php?t=3002920 anybody know if we can get anything like this over here...

just the exterior will front and rear lights and bumpers be enough? or will light brackets be needed? i think this is the cheaper option than buying a facelift , i know people will be against it but it can be swapped back no problem mike

been thinking about getting rid of the teg for the last two days, reason being is i want a track/weekend car (with a view of doing sprints and hill climbs), and i want a reliable fairly economical car for everyday. due to what the teg is worth, i dont/cant bring myself to turning into a more...

I think my synchros are on their way out on 2nd and 4th, gear selection feels rough after oulton park Would it be better to get the box rebuilt, im tempted to get a 5.1 fd Or Is there anywhere that does reconditioned boxes that will accept mine in part ex? Cheers mike

Anybody else interested in joining in? Ive gone through www.trackdays.co.uk

Anyone done this? I believe the rail will have to be modded. Thanks Mike

Driving on my way to work before and the car started to splutter and stop accelerating at 4000rpm Ive checked the oil levels and they are fine Im running k100 VTEC is set at 4.5k and the static limiter is at 4k Wether its a coinsidence i seem to think the stationary rev limiter is active...

I know everyone fits an rbc intake manifold, but for that to work with my j's racing intake requires alot of work and money, Im not really chasing power, i just want the car more driveable lower down so im getting it K100'd the end of the month, with this spec Bc header 60mm maxracing exhaust...

Couldnt use the search What are peoples technical opinions on coils, I will be after some coilovers with camber adjustable mounts but i dont want them to be extremely harsh on the road, but be able to perform firm enough on track http://www.bc-racing.co.uk/c-bca07/honda-integra-dc5-01-06/ I...

hey im unsure which section to post this in so ive put it here, feel free to move it. will i need to run a baffled sump with bridgestone re070? they look like more of a road tyre compared to advan ad08s if i will need a baffled sump ill just probably go for advans similar price so...

im browsing Minkara for inspiration and come across this custom front lip according the google translate i personally love it

Do aftermarket strut braces front and rear actually make a difference to cornering performance? I ask because the chassis is braced up from the factory even if they are thinner than aftermarket ones. Im trying to justify some j's racings ones ha Cheers Mike

anyone local going? this will be my first track day, EDIT- ive editied the original post, new one is for WEDNESDAY 23rd NOV open pit with Club MSV link here http://www.clubmsv.com/car-home/event-details.aspx?productid=1006 Few of us going now, see below for list

hey guys had an MOT 7 days ago failed badly on emissions, (excessively high on idle) i have the exact figures if anyones interested the car has aem long arm cai and catback exhaust. the garage said the CAT was suspect so i got a 2nd hand one spent 2 days under the car fitting it, took it back...