Search results for query: Springs

...all is well have been researching on this forum for a while now. Ipicked up a 2003 dc5 a while back and previous owner had put some lowering springs on, think they are carbon culture brand.I would like to change these for something with less of a drop. I wouldn’t even mind using oem...

...that the part number corresponded to that fitment. So that is red flag 1. Not a total dealbreaker, but it makes me wonder now if the rear springs with it are actual type-r springs?, or if they too are from a CR-V. I attached pictures below of the set up, and I would really love your opinion...

Hi, Does anyone know where I can get a set of DC5 facelift OEM Shocks and Springs or if it's even possible to still buy new? Cheers Sent from my SM-A520F using Tapatalk

My car is lowered on an unknown brand of springs. The rear is too low for me and gives that reverse rake look. Don’t want to go for coilovers at this time so I’ve been looking at Spoon springs but I’ll be using them with oem shocks. My car is PFL FWIW. Before going this route, is there anything...

Hi I've got a set of tein springs on my teg but the front end is too high. Rear is fine but want the front down quite a bit more. Before I go down the coilover route which springs are the lowest available? Pics to give me an idea would be very helpful as well, thank you.

...to the teg. I'm having suspension parts etc out. Soooo, whilst its out i thought I'd update few things. I'm running mugen showa dampers and springs. I'm on about 78k miles (not km) I'm thinking of either changing to spoon lowering springs. Or swapping for tien coilovers as only about 30...

...but search function isn't working for me atm. Looking at dropping my 'teg slightly and have read Eibach are more favourable than Twin S Springs. Has anyone tried both and what were your experiences with them? Also, does a FRSU need to be done once it has been dropped? TIA Sent from my...

Hello, I wonder if somebody can help... I had some new Spoon springs fitted to my car a while ago and they've started clonking / clunking (or knocking - whatever the right term is!) quite a bit. It's very annoying. Since then I seem to remember reading somewhere that they need a rubber sheath...

Looking at springs for my facelift DC5, could people post pictures of what they have. I wanted to get the Eibach Pro springs but seen a few people not happy with the reverse rake. Thanks

...it in the next day or so. I have completely removed my Buddyclub coilovers and am replacing them with a set of standard shocks/lowering springs. The issue I am facing is that the new setup is longer than the buddyclubs and I am struggling to get the bush top line up with where the lower...

Hi all, Just thought I'd pop a quick post up as I've encountered a bit of an issue after installing some eibach springs. The car clunks when turning tight low speed corners, initially I thought this was the n/s outer CV joint and have ordered a blue print part, however it seems that the noise...

As the title,sure it's been done to death but I can never find diddly using tge search.....I'm doing a suspension refresh,done all the bushes,rack slider ect Now ideally I'd like to just go decent shocks/maybe a slight drop but can't seem to find anyone doing kits for a dc5....so do I just opt...

Is anyone running the above? Im booked in for camber arms and bolts on the 19th of next month, but was wondering if anyone has used this set up before and weather if has rubbed or not? And what degree of camber you ran on the rear? Thanks. Sent from my iPhone using Tapatalk

Hi guys. So I've got a set of coilovers being built with area Motorsport and said that they are having difficulty getting hold of some eibach springs for the rears. They mentioned they'll order some swift springs instead? Never heard of them? Are they any good? Thanks Reggie

Anyone running either them and have any pics/reviews? - I am going to be buying a set of lowering springs in the next 2 weeks and cant decide which set i want. :) Thanks Lads/Lasses :)

Hi all, Looking to have my geo setup after fitting new track rod ends and would like to improve the geometry if possible without sacrificing tyre wear as the car is my daily. Is there much benefit in altering the geo on standard suspension? I don't have any DC5 specialists local to me so...

...Currently going over my car and need engine mounts, track rod ends a few bushes etc as part of a suspension overhaul. The car has Eibach springs on standard shocks at the moment. The intention with this car is to look at using it fairly regularly on track next year so I was wondering just...

My DC5 has Spoon Springs and a fast road setup and to be honest, its pretty horrible. The handling is great but the springs crash, bang, rattle and clonk all the time and its just getting too annoying now. Tom at TGM warned me they would do it but as the car is possibly going back to being a...

Hi guys looking to buy lowering springs for oem shocks can I get advice on best ones that avoid a mega harsh ride and being knocky or clicky? Thanks

...bothered costing with Honda) - so already on the way towards coilover territory. Hardly tracking the car, just occasional use on my days off work so full blown coils would be a tad wasted. Addendum -- found since some nameless lowering springs in the loft but still seeing the options Thanks